This Kit is designed specifically for 21′ through to ’23 BMW R 1250 GS & GS/A ONLY. OR in other words ‘The R1250GS’s and GSA’s with the Adaptive Headlight and Multifunction Turn Signals.
A Matching Set For the Front Multifuctional Turn Signals
Want the combination (front and rear) set and save money
For all LC R1200/R1250 GS/GSA’s between 2013 to 2020 without the adaptive headlight and multifunction turn signals
BMW R 1250 GS/A Model years 2021/22/23 EXTREME EVO range multifunction turn signal kit. OSRAM Automotive LED’s power Weiser’s impressive rear Triple Function red running/brake lights with amber turn signal kit. With electronics designed specifically for & fully compatible with the 2021/’22/’23 BMW R1250 GS/A. The Triple Function rear kits include new housings and all OEM connectors
Description
Combined into an attractive intelligent electronic circuit board design, the rear triple function kit offers Weiser’s best ever performing multifunction turn signals. The rear lights contain 12 amber LEDs for the turn signal function and 12 bright red LED’s for running lights and a high intensity brake light function.
When the ignition is on, the rear running lights are always on until you indicate. When indicating, the running light goes out on the indicating side and flashes amber. Cancel your turn signal and the running light comes back on. At the rear, these products work alongside your existing brake light, so you have up to three brake lights for maximum conspicuity & safety. When indicating, the brake light goes out on the indicating side and the turn signal illuminates. Cancel the turn signal and the brake light will come back on. The design always gives priority function to the turn signals when they are activated. Hazard lights will operate as normal.
Key Features
- High intensity LED Triple Function rear running/brake lights/turn signals kit
- Automotive industry approved LEDs from OSRAM
- Up to 10x brighter than OEM lights
- OSRAM LEDs come in bright, vibrant colors for maximum visibility
- Compatible with the bikes CAN-bus motorcycle PWM signal electronics
- Guaranteed no fault codes
- Kits include all housings and OEM turn signal cables & connectors.
- Simple self-installation – full installation kits and directions included
- Tech support available by phone and online
- Installation is non-invasive no OEM wires are cut. No brackets, drilling or clamping required.
- Increases conspicuity and safety without spoiling the look of your bike
- 4-year warranty
Rear Kit – Package includes:
- 2 x Triple Function LED Running/Brake Light/Turn Signals
- 2 x Tinted Lenses
- 2 x Weiser wires 900 mm long (Black)
- 2 x Weiser wires 900 mm long (Grey)
- 5 x zip ties
- 2 x Posi Twist
- 1 x Posi Tap
- 1 x Posi Lock
- 2 x Locking Keys
- 1 x Solid State Dual electronic relay with battery termination (Also allows the installation of the Weiser Dual Function front kit.
- Installation instructions and circuit diagram
Technical Spec:
- Compatible with OEM PWM (Pulse Width Modulation) signals from CAN-bus (for non USA variants)
- 12V
- 90 mA (each pair) red running lights
- 250mA (each pair) when Brake light activated.