This Combo Kit is designed specifically for 21′ through to ’23 BMW R 1250 GS & GS/A ONLY. OR in other words ‘The R1250GS’s and GSA’s with the Adaptive Headlight and Multifunction Turn Signals.
For all LC R1200/R1250 GS/GSA’s between 2013 to 2020 without the adaptive headlight and multifunction turn signals
BMW R 1250 GS/A Model years 2021/22/23 EXTREME EVO range multifunction indicator kit. OSRAM Automotive LED’s power Weiser’s best ever white driving light/amber indicator front kit and new red running/brake with amber indicator rear kit. Dual function front and rear kits includes new housings and swaps out the front OEM factory fitted indicator low level amber running light for Weiser’s ultra bright driving lights/indicators; the lights are programmed to accept the Can-Bus’s existing PWM signal controlling the driving and turn functions; making installation simple.
Combined into an attractive intelligent electronic circuit board design, the front dual and rear triple function kit offers our best ever performing multifunction indicators :- 12 bright white LEDs for impressive daytime or nighttime illumination together with 12 amber LEDs for the indicators function. The rear lights contain 12 amber LEDs for indicators and 12 bright red LEDs as running lights, which offer a high intensity brake light function.
When the ignition is on, the driving lights are always on until you indicate. When indicating, the driving light goes out on the indicating side and flashes amber. Cancel your turn signal and the driving light comes back on. At the rear, these products work alongside your existing brake light, so you have up to three brake lights at all times for maximum conspicuity & safety. When indicating, the brake light goes out on the indicating side and the turn signal illuminates. Cancel the indicator and the brake light will come back on. The design always gives priority function to the turn signals when they are activated. Hazard lights will operate as normal.
Key Features
- Complete high intensity LED Dual Function front driving lights/indicators and Triple Function rear running/brake lights/indicators kit
- Automotive industry approved LEDs from OSRAM
- Up to 10x brighter than OEM lights
- OSRAM LEDs come in bright, vibrant colours for maximum visibility
- Compatible with the bikes CAN-bus motorcycle PWM signal electronics
- Guaranteed no fault codes
- Kits include all housings and OEM indicator cables & connectors.
- Simple self-installation – full installation kits and directions included
- Tech support available by phone and online
- Installation is non-invasive no OEM wires are cut. No brackets, drilling or clamping required.
- Increases conspicuity and safety without spoiling the look of your bike
- 4-year warranty
Designed and manufactured in both the USA and the UK.
Front Kit – Package Includes:
- 2 x Dual Function LED Driving Light/Indicators
- 2 x Weiser wires 900 mm long (Black)
- 1 x Extension wire 900 mm long
- 5 x zip ties
- 1 x Posi Twist
- 1 x Posi Tap
- 1 x Posi Lock
- 2 x Locking Keys
- Installation instructions and circuit diagram
Rear Kit – Package includes:
- 2 x Triple Function LED Running/Brake Light/Indicators
- 2 x Weiser wires 900 mm long (Black)
- 2 x Weiser wires 900 mm long (Grey)
- 5 x zip ties
- 2 x Posi Twist
- 1 x Posi Tap
- 1 x Posi Lock
- 2 x Locking Keys
- 1 x Solid State Dual electronic relay with battery termination
Technical Spec:
- Compatible with OEM PWM (Pulse Width Modulation) signals from CAN-bus
- 12V
- 600 mA (each pair)